OS LUBE PLUS - Multi Function Lubricant with Antifoam

 

 

Lubricity

Drilling fluid lubricity is a key parameter in achieving high ROPs. Drilling fluid lubricity directly affects power transmission to the bit and BHA. Excessive torque and drag leads to slow ROPs, drill-string failures and expensive fishing jobs and side-tracks. Drilling fluid lubricity is especially important in directional wells in both cased and open hole. A good lubricant can make the difference between success and failure.

 

Product Information

OS LUBE PLUS is a solution of modified natural oils with the addition of antifoaming properties. This product exhibits excellent properties as well as other surface active properties such as emulsification and wetting.

OS LUBE PLUS is used in any drilling or workover operation where excessive torque or drag is seen or anticipated.

 

Typical Physical Properties

Appearance   -   Dark Amber Liquid

S.G. @ 25oC   -   0.85 – 0.90

Flash Point   -   >65oC

Boiling Point   -   >150oC

Viscosity @ 25oC   -   300 cps

pH (10% IPA/H20)   -   7 – 8

Pour Point   -   -12oC

 

Advantages

OS LUBE PLUS disperses easily in all water-based drilling fluids and combines excellent lubricity properties with strong antifoam characteristics.

 

Application

OS LUBE PLUS should be applied at a dosage of approximately 0.02 – 0.1% by volume for brines or 1-2% by volume for weighted fluids. However, concentrations can vary greatly depending upon the severity of the problem encountered.

 

Packaging

OS LUBE PLUS is packaged in drums, net weight 180 kgs.

 

 

 

Print Print | Sitemap
© Oilfield Supplies & Services Ltd